The Replacement Components for the Warrick Series 1 and Series 2 Controls comes in two flavors, the Retro-Fit Components and the DIN-Mount Components. The Retro-Fit Components can be used in any Series 1 or Series 2 Warrick Enclosure. The DIN-Mount Components can be used in Warrick NEMA 4 & NEMA 7/9 Enclosures. It does not fit in the Warrick NEMA 1 Enclosure.
Retro-Fit Assembly and Components: Shown Below
DIN-Mount Assembly and Components: Shown Below
Model Retro-Fit Components
 |
Retro-Fit Plate to fit Warrick Series 1 & Series 2 Mounting Holes. Accommodates Relay Socket, Relay & Series 26M Octal Socket Components. |
|
10A 3PDT Relay (UL Recognized file E41643, CSA Certified file LR31928. |
|
UL Relay Socket. (UL E87929, CSA LR31928) |
|
UL 11-Pin Octal Socket for Series 26M Control. (UL E60008, CSA LR29513) |
|
Specify a Series 26M to suit your application, sold separately. Rated U.L. 353 File # MP1430 as LIMIT CONTROL |
Model DIN-Mount Components
|
DIN Rail Accommodates Relay Socket, Relay and Series 26M Octal Socket Components. Not for use in Warrick NEMA 1 Enclosure. |
|
10A 3PDT Relay (UL Recognitized file E41643, CSA Certified file LR31928. |
|
UL Relay Socket. (UL E87929, CSA LR31928) |
|
UL 11-Pin Octal Socket for Series 26M Control. (UL E60008, CSA LR29513) |
|
Specify a Series 26M to suit your application, sold separately. Rated U.L. 353 File # MP1430 as LIMIT CONTROL |
Application Considerations:
|
|
The Retro-Fit Components and the DIN-Mount Components each have a 10A Relay rated at 1/2 HP with LED Indication while the Warrick Series 1 and Series 2 had 16A Relays rated 1 HP with no LED Indication. |
|
|
Series 26M Control has Reset Button capability and optional Power Outage Feature which automatically resets the Series 26M to regular operation if water is present to LLCO Probe after Power Outage. The old Series 1 and Series 2 would have to be manually reset even if LLCO had water present. |
|
|
The Series 26M has a much wider Sensitivity Range to order from: 4.7K to 100K. |
|
|
The Series 26M is available with either 24 VAC, 120 VAC, 240 AC, or 208/240 VAC. Note: The 240 VAC and the 208/240 VAC do not carry UL Limit Control Recognition. |
|
|
The Series 26M Series has standard 3 Second built in time delay which reduces effects of turbulence. |
|
|
The Series 26M Solid State has LED Indication and meets CSD1 Requirements. |
|
| The Series 26M has Low Probe Voltage at 12 VAC eliminating shock hazard present with the Old Warrick Series 1 Controls. |
For Complete Information: PDF Retro-Components
For Series 1 or Series 2 Replacement use either the Retro-Fit Components or the DIN-Mount Components and a Series 26M Control. In most applications with a 120 VAC Power use one of the Components Kits with a 26MC1M0-F
