Battery powered with a range up to one mile. Expected battery life is 3 - 5 years. 602T is packaged in a 4.5" diameter by 11" long water-resistant container with a 1" NPT fitting on the bottom for easy installation.
603T High Power Transmitter
Battery powered with a range up to five miles. Expected battery life is 1 - 2 years. 603T is packaged the same as 602T above.
611T Single Output
Handheld Transmitter
Button press transmits closed-contact signal to
energize one or more relay output(s).
614T Four Output
Handheld Transmitter
Button press transmits closed-contact signal to
energize four or more relay output(s).
601R Standard Power
Receiver
The 601R can be used only in a 1-transmitter to
1-receiver system. Receiver actuation relay provides local output of remote
contact monitored by mated Isaacs transmitter. Fault Relay provide
output on loss of signal or low battery..
605R Single Output, 16-transmitter Receiver
Programmable. Designed for applications where 1
to 16 transmitters can control the single relay output at a receiver.
Multiple receivers can be used in a system. 605R is packaged the same as
601R above. Uses 12 VDC power.
607R Four Output, 16-transmitter Receiver
Programmable. Designed for applications where up
to four relay outputs at a receiver can be controlled by 1 to 16
transmitters. Multiple receivers can be used in a system. 607R is packaged
the same as 601R above. Uses 12 VDC power.
616R Sixteen Output, 64-transmitter Receiver
Programmable. Designed for applications where up
to sixteen relay-outputs at a receiver can be controlled by 1 to 64
transmitters. Multiple receivers can be used in a system. A two-digit
display and LED's for each output show status of all transmitters and
outputs. The wall/desk mount, indoor enclosure is approximately 11" by 8.5"
by 1.75". Uses 12 VDC power.
