| |
|
UCL-200
Premier Continuous Ultrasonic Sensors |
|

 |
Accuracy of
±0.25% |
 |
Easy
push-button calibration |
 |
Automatic
temperature compensation over entire range |
 |
Filtration
eliminates false echo signals |
 |
Small beam
(8°) allows installation in tight spaces |
Our premier
ultrasonic sensors are available in three models: Intrinsically Safe
(P/N 201001): This two-wire model provides noncontact measurement up to
18 feet. Approved for use in Class I, Groups A, B, C and D; Class II,
Groups E, F and G; Class III; T3C environments, the transmitter is an
excellent choice for use with solvent, hydrocarbon and petroleum type
liquids. General Purpose with Relays (P/N 201002): This three-wire model
provides non-contact measurement up to 24.5 feet and features an
integral relay for pump, valve or alarm control. This transmitter is an
excellent choice for applications with dirty, coating, scaling or
corrosive type liquids such as wastewater, crude oil or wax. Long Range
with Relays (P/N 201003): This flange mounted, three-wire model provides
non-contact measurement up to 40 feet. Its deeper measuring range makes
this general purpose transmitter ideal for large bulk storage tanks,
water or chemical reservoirs and waste stations. Media examples include
chemicals, acids and slurries. |
Specifications:
|
Accuracy
|
±0.25% of span
|
|
Resolution
|
0.125"
|
|
Output
|
4-20mA
|
|
Beam Width
|
8-degree conical
|
|
Failure Mode
|
22mA
|
|
Supply
Voltage |
14 to 36 VDC
|
|
Pressure
|
30 psi @ 77°F
|
|
Temperature
|
-40°F to +140°F
(-40°C to +60°C) |
|
Temperature
Compensation |
Automatic over
entire range |
|
Enclosure
Rating |
NEMA 4X (IP 65)
|
|
Enclosure
Material |
Polypropylene
|
|
Transducer
Material |
PVDF
|
|
Calibration
|
Push button
|
|
Display units
|
Inches (cm)
|
|
Conduit
Connection |
0.5"NPT
|
|
CE Compliance
|
EN 50082-2
immunity
EN 55011 emissions
ENN 61010-1 safety* |
* Not applicable to Part Number 201001
|
|
|