C A Briggs Company

The LevelWorks® People

Cap-Level® is an excellent choice for continuous level measurement. Cap-Level® uses the proven method of capacitance change to determine the level of product in the vessel. This translates into an accurate and dependable measurement device for your process. Simply stated, as the level of product in the vessel changes, the capacitance between the probe and the vessel wall also changes. The solid-state electronics of the Cap-Level® continually measures and compares this change to a very stable reference circuit, and provides accurate and dependable output signal (4-20 mA) proportional to the vessel contents.

The “industry standard” 4-20 mA output is provided with a selectable dampening function to stabilize readings where severe agitation is present. Simple zero and span adjustment make calibration easy. The probe configurations and materials offered allow you to custom fit Cap-Level® to your application.

Cap-Level II is a 4-wire transmitter with 120 or 240 VAC while the Cap-Level IIA is a 2-wire transmitter with 24VDC.

Bindicator Cap-Level® II

 Bindicator Cap-Level® II

• High reliability
• 120 VAC or 240 VAC input
• 4-20mA output
• Hi/Lo alarm relays w/adjustable hysteresis (depending on model)
• NEMA 4, 7, 9
• Rigid or cable probes

• 24 VDC, 2-wire transmitter
• High reliability
• 3/4" NPT, 1 1/4" NPT or Flanges
• Rigid or cable probes
• Intrinsically safe when used with approved barriers

PDF Data Sheet

Sensors and Level Controls For Process and Machine Automation


 Level | Controllers | Flow | Intrinsically Safe | Pressure | Remote Monitoring | Wireless I/O
 Tell Us About your application | Contact US | Company Information

 

Designed by Jacobus Systems